Final ModelPlanning and decisions 

Location: Placed with the back of the structure to East-south-east and open up to West - make lee for the wind  in the closed space of the structure

Picture

Anchorage points: 

The open part of the structure should be attached with a wire in two asymmetric points to a wire which are shaped in a circular shape connected by three poles so it is able to slide and be tranformed and the wire to the fabric should be longer than the distance from the fabric to the poles so it also is able to move upwards and downwards.

The space of refuge: The anchorage points should be poles from which the structure is connected with wires which makes it possible for the structure to move and be affected by wind but still be in the same general position. 
And to make lee we will add more fabric so it will go to the ground and in the middle also attach the structure further with wires to the ground

The structure of the material for of the space of refuge - manipulation(exstra props):The structure of the material should be scaffold with lists and should go down to this tip in the corner of the space. 

And thereby create this more dictated form which should be a triangular shape with a flat “roof”

The apperance of the structure: The material of the structure should be fabric with white opaque full gloss plastic rhombus-elements.

There should be openings in a part of the structure in the opposite end of the structure than the space of refuge.
The openings should open inwards to make it possible to see reflections of the outside and reflections of the light inside and make the structure  outside homogenous.